It is very common for painters nowadays to rent man lifts in terms of both efficiency and safety compared to accessing hard-to-reach points via a stairway, traditional scaffolding, or ladders. Painters have various types of jobs that they work on, including interior painting, exterior painting, and industrial painting. Many of these jobs require painting tall walls or at heights. Man lifts can be crucial for completing these jobs safely.
Before & After Using a Spider Boom Lift for Painting Work
Why a Man Lift Rental is Ideal for Painting Work?
Versatile in any instance where a worker needs to work at height, and AWPs & MEWPs fit the bill!
Relatively easy to use.
Affordability.
Easy to move from one place to another.
What Type of Man Lift is Best for Painters?
There is no a specific answer as to what man lift is the best fit for a painter. It is all dependent on personal preference and the individual needs of each specific project.
Articulating boom lifts, and telescopic boom lifts or spider (tracked) boom lifts are designed for reaching otherwise inaccessible heights due to long arms can be angled in many directions. They can lift and situate the painter directly in front of the painting area efficiently and safely.
Flexible in Using Boom Lift for Exterior Painting
Scissor lifts can also be used to paint from low to medium height because their large platform allows for multiple workers and plenty of tools. Scissor lifts can only extend straight up, so they need to be placed directly under the painting area. Operators will need to move them around or across the work zone to paint where they need. With a crawler scissor lift, you can operate over uneven, slopes, unfinished, or raw ground like dirt, grass, gravel, or sand. It is ideal for painters working on new construction zones where painting is required but the land is not fully developed and sloped.
Crawler Scissor Lift for Exterior Painting on Slopes
Mayon’s Scissor Lift Rental Compact14 for Painting at C1 Bldg BGC in Taguig
No matter if you operate scissor lifts, articulating boom lifts, or telescopic boom lifts, you need to be trained before interior and exterior painting on an AWP. Among all the aerial lift hazards, falls are the most common and sometimes the most dangerous. Understanding is the key to preventing these types of accidents for all painters.
If you’re still not sure what type of lift would work best for you, give our team a call and tell us about your project. We’d be happy to recommend a suitable one for you. Mayon Machinery has a wide range of aerial work platforms available to properly position the basket so that you can comfortably paint at heights. No matter how or where an AWP is used, all our operators are required to complete an aerial lift certification by TESDA will make sure your job is done safely.
Sometimes light bulb changes are extra complicated, so a spider lift may be your best efficient and economical solution for this challenging application where traditional lifts, scaffold or other alternatives are inadequate.
Building owners and facility managers place a high value on well-lit public spaces. In particular, large buildings in the education, healthcare, public and retail sectors are laid out to accommodate steady and large streams of visitors with the goal to create an airy and transparent environment that is friendly, accessible, and easy to navigate. They typically do not have a good solution for replacing interior light bulbs at height with 3-story (11m) or higher atriums when they burn out. The TEUPENSpider Lifts LEO Series is a preferable solution for changing Fluorescent, Halogen, or LED lights without causing collateral damage or interruption of processes.
Benefits of using spider lifts to change light bulbs
Compact size – fit through single & standard double doors
Self-leveling, multi-position outrigger system permits to automatic set up of the machine in confined areas and on slopes
Hydraulically height- & width adjustable track system permits narrowing and lowering the machine for passing entrances or widening the track footprint for more ground clearance and traction for driving alongside slopes or in terrain
Dual power source available: A powerful and robust Petrol or Diesel Engine for outdoor use, electric motor or battery for silent and zero-emission work inside of buildings
“Fuzzy-logic control box/ system” provides the smoothest boom operation without jerky movements in the industry. The key element of the new station will be shown a new information system, complete with graphics that are easy to read even in direct sunlight
The clearly-arranged control allows safe and easy operation. To drive on tracks or to set up using the stabilizer function, the cable/radio remote control comes in handy as the operator can move around the machine to get a better overview. Furthermore, on the control panel, an interactive display shows all available boom functions, safety information and allows error analysis.
Which model is suitable for your job?
To decide which model works best for your job, you should determine the factual problems of your facility. Here’s a look at the most important terms to identify the need:
Who?
Who will use the equipment?
How many people will be on the platform at once?
Will they need operator or familiarization training?
What?
What kind of work will be performed?
What are you lifting, and how much does it weigh?
What are the obstacles on the worksite?
Are there unusual work conditions or multiple shifts?
What is your power source preference?
Where?
Where will the equipment be used?
Are you working on a single site or multiple sites?
Is the work indoors, outdoors, or a combination?
What site characteristics influence the lift’s use?
Do you need to drive up or down a ramp?
Do you need doorway access? Single, double, or larger?
Is the ground level?
Is there a slab, concrete, or asphalt floor?
Will you have narrow or congested access?
Is it a caustic or hazardous environment?
Will fuel be readily available?
Is there access to electricity on-site?
How?
How will the equipment be used?
How high do you need to reach or work?
How much outreach is needed?
How much weight do you need to lift?
How will you transport the equipment?
When?
When will the equipment be used?
For how long?
In buildings with multiple usage and ever-changing events, there is always a time plan to be kept – therefore a flexible and versatile aerial lift solution is so important. Asking our expert at Mayon Machinery before making a hiring/purchasing decision will help ensure you find the best spider lift for replacing interior light bulbs.
On construction sites, industrial work zones, and municipal jobs, cleanliness is a must, but it’s usually not enough to just brush debris aside. When it’s necessary to collect and dump dust, dirt, and debris, the easy-to-use sweeper/broom attachments gets the job done.
SWEEP, COLLECT AND DUMP DIRT AND OTHER DEBRIS WITH THE SWEEPER/BROOM ATTACHMENT
SKID STEER BROOM & SWEEPER
Landscapers, environmental companies, municipalities, general contractors, professional parking lot cleaners, and airports, all rely on this type of skid steer attachment to maintain the environment and comply with any environmental issues that they might face. To maximize their investment in this increasingly-popular type of equipment, making it a sweeper merits consideration.
During operation, tough, poly bristles flick debris into the sweeper collection bucket – and when it’s full, you can lift, dump and dispose. It does the work of multiple clean-up attachments with optimal bristle-to-surface contact and highly productive efficiency. It’s ideal for site cleanup, daily dust abatement, road construction, airport maintenance, and more.
Sweeper Attachment on Bobcat Skid Steer Loader
OPERATIONAL
BASICS
The sweeper’s hydraulic motor spins durable bristles mounted to its rotating drum. Powerful flicking action sends dirt and debris flying into the attachment’s collection bucket. Bristles spin in either direction, forward or reverse.
When moving the loader in reverse, you can scrape mud and caked-on debris with the bucket wear edge as you sweep the material into the bucket – similar to sweeping with a hand broom and dustpan. When traveling forward, the bristles send material flying forward against a rubber flap. From there, materials go over the top of the bristles and into the bucket. When forward sweeping, keep the wear edge above the surface for optimum performance and wear edge life.
The five Bobcat sweeper models provide sweeping widths from 44’’ (1118 mm) to 84’’ (2134 mm), with bucket capacities from 0.15 to 0.33 m3 for the collection of debris.
FEATURES
Poly bristles sweep and deposit debris in the sweeper bucket.
Simply dump sweeper bucket when full. No need for multiple cleanup attachments.
Cut through materials with the replaceable and reversible bucket cutting edge.
Effectively operate in forward and reverse.
Ideal for cleaning parking lots, pavements, docks, and warehouses, as well as industrial and recycling facilities, construction and demolition sites, and animal sheds in agriculture.
MANITOU EDGE PICKUP/HOPPER BROOM ATTACHMENT
Broom attachments are selected by the material to be removed and the surface on which the broom is used. The EDGE pickup/hopper broom is a bi-directional collection broom that allows the operator to sweep forward and reverse, and gives excellent performance in milling, material pickup, road maintenance, and job-site cleanup at a cost-effective investment.
Hopper Broom Attachment on Gehl Skid Loader
OPERATIONAL
BASICS
The EDGE pickup/hopper broom is a single-motor broom and comes in widths ranging from 60” (1524 mm), 72’’ (1829 mm), and 84” (2134 mm).
FEATURES
Ideal for milling, material pickup, parking lots, and road maintenance.
Bi-directional broom operates forward or reverse.
Bolt-on motor now featured with a protection guard.
Quick-change broom sections allow for easy replacement.
A rubber skirt and protecting shroud to keep dirt and debris contained.
Front and side steps for easy access to and from the cab.
Front bumper and no caster wheel allow you to get up close to objects without damaging the broom.
OPTIONS AND ACCESSORIES
GUTTER BRUSH:
Cleans curbs,
alongside buildings and other hard-to-reach areas. Widens the sweeper’s total
width by one foot to allow more coverage per pass. Can be raised and stored
vertically when not in use.
WATER KIT:
Keeps dust and debris under control when operating in tough environments, with jet nozzles spraying water evenly across a surface. This optional Dust Control Kit on hopper broom attachment includes 25 gals. tank, pump, and nozzles that mounted to top of hopper broom.
WHEEL KIT:
Available as an option for the 84-inch sweeper attachment, the wheel kit protects surfaces such as concrete, cobblestone, and asphalt from scrapes and scratches by suspending the cutting edge of the sweeper during forward travel. Two mounted caster wheels are included in the kit.
BRISTLES:
Ideal for all sweeping conditions, poly bristles provides better flicking action for effective debris removal. Steel bristle and combo bristle (poly and steel) sections are also available for stubborn debris. This option is only available on sweeper attachment.
WATERLESS DUST
ABATEMENT:
It has its own filtering system for eliminating potentially large dust clouds, only available on broom attachment. Equipped with a 12V shaker dislodges loose debris from the filter directly into the hopper, unit is combined with hydraulic cylinder and two caster wheels and mounted on the side towards front of the broom. Suitable for example milling, material pickup, parking lot, road maintenance, and job-site cleanup applications, broom feature large industrial dust filter. This unit works well for indoor application cleanup, as it features a “waterless” dust abatement system.
In conclusion, by investing in quality pick-up brooms, you can effectively satisfy this job requirement while simultaneously optimizing the onsite use of skid steers.
The compact equipment specialists at Mayon Machinery have extensive knowledge of all makes of skid steer loaders and their corresponding attachments, and can therefore help you in choosing the right pick-up broom attachments for your respective type or types of work.
Philippines National Railway (PNR) North-South Commuter Railway Project (NSCR) Clark Phase 2 is to strengthen the transportation network and alleviate serious traffic congestion in the Greater Capital Region by extending the North-South Commuter Railway from Clark to New ClarkCity.
Upon completion, PNR Clark Phase 2 will slash travel time between Clark, Pampanga, and Malolos, Bulacan to 35 minutes from one hour and 30 minutes.
Apart from shorter travel times, the line will have the Airport Express which will connect arriving travelers from Clark International Airport to Makati in Metro Manila in just 55 minutes.
A piece of equipment in good working order is crucial to a productive worksite. The key to improving constructability with the right equipment is important, particularly in selecting which machines are most appropriate for the job. The right equipment partner can save your time and money.
Given the pressures of tightening timelines, Mayon Machinery could be your single-source jobsite solutions partner that unlocks construction productivity.
We provide an effective solution to a variety of jobsite challenges, especially the North-South Commuter Railway Project (NSCR) Clark Phase 2 has boosted construction performance with our Kato KR-25H 25 tons Rough Terrain Crane, Kato SL-650R 65 tons Rough Terrain Crane, Kobelco 7080 80 tons Crawler Crane, Manitou MRT1840 Telehandler, as well as many boom lifts and scissor lifts supplied.
Photo courtesy of General Lifting Activities in San Fernando, Pampanga
Mayon’s equipment assists in aggregate bin installation
Mayon’s Boom Truck assists on silo railings installation
Mayon’s Manitou MRT1840 hauling of Silo’s ladder and piping for installation
Whether you need several kinds of equipment such as cranes, aerial work platforms, generators, light towers, skid loaders, or something else, Mayon Machinery is your single-source provider for jobsite equipment and solutions. Call us at +63 (2) 776 0254, visit our local branch or contact our team to find the right equipment for your next project to maximize your uptime.
The solarindustry continues to surge and quality equipment is needed to keep up with the quick pace of solar field installations. To meet the demands of commercial solar contractors and the expansive solar fields they install, our solar pile driver can drive the pile into soil or rock to support the solar panel for solar power station systems and guardrail installation, the common application is for Photovoltaic panels installation.
This pile driver drives posts with great precision thanks to its compact design, stability, and easy handling. The machine is simple to operate and very user-friendly.
Using unique construction technology and climbing design, the pile driver can be adjusted according to the height of the slope to adapt to the maximum 45-degree sloping photovoltaic construction.
MZ398Y was originally designed as the early-stage piling equipment for photovoltaic power stations. Through R&D and upgrading, it can also be used in piling projects in farms, pastures, orchards, water wells, water conservancies, power plants, open mining, roadbuilding, and other blasting hole constructions.
Mayon’s Solar pile drivers piling works of solar modules foundation at Aboitiz PowerCorporation‘s 94-megawatt-peak solar power facility in Cayanga, Bugallon in Pangasinan province.
Photo courtesy of Mayon Machinery Rental ActivitiesPhoto courtesy of Mayon Machinery’s MZ398Y Photovoltaic Piling Machine Piling Works of Solar Modules Foundation at AboitizPower’s Solar Power Plant
Solar field installations require the right machine to best fit your setup, and as the need for renewable energy grows, so you can rely on Mayon Machinery to help you drive more efficiently.
